home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HAM Radio 3.2
/
Ham Radio Version 3.2 (Chestnut CD-ROMs)(1993).ISO
/
mods
/
mods2
/
mods.exe
/
lha
/
TS440S.5
< prev
next >
Wrap
Text File
|
1990-08-27
|
1KB
|
45 lines
TS440S.5
general coverage trans for the kenwood
ts-440s...............................
1-- remove the top and bottem cover....
2-- remove the five small round head
screws that secure the control boards
shield plate.........................
3-- remove the four flat head screws
that hold the face of the radio on...
4-- put somthing under the front of
the radio to hold it up off the bench.
or move the radio onto the edge of the
bench ...
5-- gently tilt the front panel down
remove the shield plate.
6-- the control board (with all the
diodes and the carrier points adjustment
dip-swich) is now easily accesse.
7-- gently move wires and look for
diode d80 ( looking down on the rig
with the front facing you) the diode is
on the bottem left of the board....
cut it ....
now your trans is now un locked....
8-- replace plate and front panel
gently as not to pinch and wires....
9-- wile you in there , if you want
the rig to have 10 hz resolution,
cut diode d66....
that mode is listed in your manual..
from:steve wb1erg.. RELAYED BY...N0KGX...GENE